Mythbackend

Juts my random details and notes about my backend server:


root@server:~# lspci
00:00.0 Host bridge: VIA Technologies, Inc. PT880 Host Bridge
00:00.1 Host bridge: VIA Technologies, Inc. PT880 Host Bridge
00:00.2 Host bridge: VIA Technologies, Inc. PT880 Host Bridge
00:00.3 Host bridge: VIA Technologies, Inc. PT880 Host Bridge
00:00.4 Host bridge: VIA Technologies, Inc. PT880 Host Bridge
00:00.7 Host bridge: VIA Technologies, Inc. PT880 Host Bridge
00:01.0 PCI bridge: VIA Technologies, Inc. VT8237 PCI Bridge
00:09.0 Multimedia video controller: Internext Compression Inc iTVC16 (CX23416) MPEG-2 Encoder (rev 01)
00:0b.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8169 Gigabit Ethernet (rev 10)
00:0c.0 Multimedia video controller: Internext Compression Inc iTVC16 (CX23416) MPEG-2 Encoder (rev 01)
00:0f.0 RAID bus controller: VIA Technologies, Inc. VIA VT6420 SATA RAID Controller (rev 80)
00:0f.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06)
00:10.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81)
00:10.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81)
00:10.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81)
00:10.3 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81)
00:10.4 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 86)
00:11.0 ISA bridge: VIA Technologies, Inc. VT8237 ISA bridge [KT600/K8T800/K8T890 South]
00:11.5 Multimedia audio controller: VIA Technologies, Inc. VT8233/A/8235/8237 AC97 Audio Controller (rev 60)
00:12.0 Ethernet controller: VIA Technologies, Inc. VT6102 [Rhine-II] (rev 78)
01:00.0 VGA compatible controller: nVidia Corporation NV34 [GeForce FX 5200] (rev a1)
root@server:~#

root@server:~# cat /proc/interrupts
CPU0
0: 17129760 IO-APIC-edge timer
1: 726 IO-APIC-edge i8042
2: 0 XT-PIC-XT cascade
4: 2 IO-APIC-edge
6: 5 IO-APIC-edge floppy
7: 0 IO-APIC-edge parport0
8: 3 IO-APIC-edge rtc
12: 318 IO-APIC-edge i8042
14: 118053 IO-APIC-edge libata
15: 100272 IO-APIC-edge libata
16: 451888 IO-APIC-fasteoi ivtv1
17: 1012024 IO-APIC-fasteoi ivtv0
19: 1 IO-APIC-fasteoi eth0
20: 166838 IO-APIC-fasteoi sata_via
21: 193 IO-APIC-fasteoi uhci_hcd:usb1, uhci_hcd:usb2, uhci_hcd:usb3, uhci_hcd:usb4, ehci_hcd:usb5
22: 8150 IO-APIC-fasteoi VIA8237
23: 72428 IO-APIC-fasteoi eth1
NMI: 0 Non-maskable interrupts
LOC: 17129698 Local timer interrupts
RES: 0 Rescheduling interrupts
CAL: 0 function call interrupts
TLB: 0 TLB shootdowns
TRM: 0 Thermal event interrupts
SPU: 0 Spurious interrupts
ERR: 0
MIS: 0
root@server:~#

root@server:~# modinfo mii
filename: /lib/modules/2.6.24-21-generic/kernel/drivers/net/mii.ko
license: GPL
description: MII hardware support library
author: Jeff Garzik
srcversion: 16DCEDEE4B5629C222C352D
depends:
vermagic: 2.6.24-21-generic SMP mod_unload 586
root@server:~#

root@server:~# dmesg |grep ivtv
[ 53.599500] ivtv: Start initialization, version 1.1.0
[ 53.599642] ivtv0: Initializing card #0
[ 53.599647] ivtv0: Autodetected Hauppauge card (cx23416 based)
[ 53.615569] ivtv0: Unreasonably low latency timer, setting to 64 (was 32)
[ 53.853110] ivtv0: Autodetected Hauppauge WinTV PVR-250
[ 54.256607] tuner 1-0061: chip found @ 0xc2 (ivtv i2c driver #0)
[ 54.686420] saa7115 1-0021: saa7115 found (1f7115d0e100000) @ 0x42 (ivtv i2c driver #0)
[ 55.549673] msp3400 1-0040: MSP3435G-B6 found @ 0x80 (ivtv i2c driver #0)
[ 55.583774] ivtv0: Registered device video0 for encoder MPG (4096 kB)
[ 55.583795] ivtv0: Registered device video32 for encoder YUV (2048 kB)
[ 55.583813] ivtv0: Registered device vbi0 for encoder VBI (1024 kB)
[ 55.583832] ivtv0: Registered device video24 for encoder PCM (320 kB)
[ 55.583835] ivtv0: Initialized card #0: Hauppauge WinTV PVR-250
[ 55.583946] ivtv1: Initializing card #1
[ 55.583950] ivtv1: Autodetected Hauppauge card (cx23416 based)
[ 55.586263] ivtv1: Unreasonably low latency timer, setting to 64 (was 32)
[ 55.593544] tuner 2-0061: chip found @ 0xc2 (ivtv i2c driver #1)
[ 55.680064] ivtv1: Autodetected Hauppauge WinTV PVR-150
[ 55.680066] ivtv1: Reopen i2c bus for IR-blaster support
[ 55.791122] tuner 2-0061: chip found @ 0xc2 (ivtv i2c driver #1)
[ 56.103842] cx25840 2-0044: cx25841-24 found @ 0x88 (ivtv i2c driver #1)
[ 56.122575] wm8775 2-001b: chip found @ 0x36 (ivtv i2c driver #1)
[ 56.130064] ivtv1: Registered device video1 for encoder MPG (4096 kB)
[ 56.130083] ivtv1: Registered device video33 for encoder YUV (2048 kB)
[ 56.130101] ivtv1: Registered device vbi1 for encoder VBI (1024 kB)
[ 56.130119] ivtv1: Registered device video25 for encoder PCM (320 kB)
[ 56.130122] ivtv1: Initialized card #1: Hauppauge WinTV PVR-150
[ 56.130145] ivtv: End initialization
[ 74.220766] ivtv0: Loaded v4l-cx2341x-enc.fw firmware (376836 bytes)
[ 74.418706] ivtv0: Encoder revision: 0x02060039
[ 75.256407] ivtv1: Loaded v4l-cx2341x-enc.fw firmware (376836 bytes)
[ 75.452784] ivtv1: Encoder revision: 0x02060039
root@server:~# debug2: channel 0: window 31928 sent adjust 33608

root@server:~# crontab -l
# m h dom mon dow command
#
00 4 * * * nice -19 /usr/local/bin/mythconverg_backup.pl --rotate 3
#
30 4 * * * nice -19 rsync -e ssh -azv --delete /root/mytti/ host@host.org:/home/host/mytti/
#

root@server:~#

root@server:~/.mythtv# fdisk -l /dev/mapper/VGforMyth-video

Disk /dev/mapper/VGforMyth-video: 599.1 GB, 599147937792 bytes
255 heads, 63 sectors/track, 72842 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0x00000000

Disk /dev/mapper/VGforMyth-video doesn't contain a valid partition table
root@server:~/.mythtv# fdisk -l /dev/sdb

Disk /dev/sdb: 300.0 GB, 300090728448 bytes
255 heads, 63 sectors/track, 36483 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0x00012e25

Device Boot Start End Blocks Id System
/dev/sdb1 * 1 36483 293049666 8e Linux LVM
root@server:~/.mythtv# fdisk -l /dev/sdc

Disk /dev/sdc: 300.0 GB, 300090728448 bytes
255 heads, 63 sectors/track, 36483 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0x00064c65

Device Boot Start End Blocks Id System
/dev/sdc1 * 1 36483 293049666 8e Linux LVM
root@server:~/.mythtv#

root@server:~/.mythtv# hdparm -I /dev/sdb

/dev/sdb:

ATA device, with non-removable media
Model Number: Maxtor 6L300S0
Serial Number: L61GMK7G
Firmware Revision: BACE1G20
Standards:
Used: ATA/ATAPI-7 T13 1532D revision 0
Supported: 7 6 5 4 & some of 8
Configuration:
Logical max current
cylinders 16383 16383
heads 16 16
sectors/track 63 63
--
CHS current addressable sectors: 16514064
LBA user addressable sectors: 268435455
LBA48 user addressable sectors: 586114704
device size with M = 1024*1024: 286188 MBytes
device size with M = 1000*1000: 300090 MBytes (300 GB)
Capabilities:
LBA, IORDY(can be disabled)
Queue depth: 32
Standby timer values: spec'd by Standard, no device specific minimum
R/W multiple sector transfer: Max = 16 Current = 16
Advanced power management level: disabled
Recommended acoustic management value: 192, current value: 254
DMA: mdma0 mdma1 mdma2 udma0 udma1 udma2 udma3 udma4 udma5 *udma6
Cycle time: min=120ns recommended=120ns
PIO: pio0 pio1 pio2 pio3 pio4
Cycle time: no flow control=120ns IORDY flow control=120ns
Commands/features:
Enabled Supported:
* SMART feature set
Security Mode feature set
* Power Management feature set
* Write cache
* Look-ahead
* Host Protected Area feature set
* WRITE_VERIFY command
* WRITE_BUFFER command
* READ_BUFFER command
* NOP cmd
* DOWNLOAD_MICROCODE
Advanced Power Management feature set
SET_MAX security extension
* Automatic Acoustic Management feature set
* 48-bit Address feature set
* Device Configuration Overlay feature set
* Mandatory FLUSH_CACHE
* FLUSH_CACHE_EXT
* SMART error logging
* SMART self-test
Media Card Pass-Through
* General Purpose Logging feature set
* WRITE_{DMA|MULTIPLE}_FUA_EXT
* URG for READ_STREAM[_DMA]_EXT
* URG for WRITE_STREAM[_DMA]_EXT
* SATA-I signaling speed (1.5Gb/s)
* Native Command Queueing (NCQ)
Software settings preservation
* SMART Command Transport (SCT) feature set
* SCT Data Tables (AC5)
Security:
Master password revision code = 65534
supported
not enabled
not locked
not frozen
not expired: security count
not supported: enhanced erase
Checksum: correct
root@server:~/.mythtv#

root@server:~/.mythtv# hdparm -I /dev/sdc

/dev/sdc:

ATA device, with non-removable media
Model Number: Maxtor 6L300S0
Serial Number: L61R6AKG
Firmware Revision: BACE1G20
Standards:
Used: ATA/ATAPI-7 T13 1532D revision 0
Supported: 7 6 5 4 & some of 8
Configuration:
Logical max current
cylinders 16383 16383
heads 16 16
sectors/track 63 63
--
CHS current addressable sectors: 16514064
LBA user addressable sectors: 268435455
LBA48 user addressable sectors: 586114704
device size with M = 1024*1024: 286188 MBytes
device size with M = 1000*1000: 300090 MBytes (300 GB)
Capabilities:
LBA, IORDY(can be disabled)
Queue depth: 32
Standby timer values: spec'd by Standard, no device specific minimum
R/W multiple sector transfer: Max = 16 Current = 16
Advanced power management level: disabled
Recommended acoustic management value: 192, current value: 254
DMA: mdma0 mdma1 mdma2 udma0 udma1 udma2 udma3 udma4 udma5 *udma6
Cycle time: min=120ns recommended=120ns
PIO: pio0 pio1 pio2 pio3 pio4
Cycle time: no flow control=120ns IORDY flow control=120ns
Commands/features:
Enabled Supported:
* SMART feature set
Security Mode feature set
* Power Management feature set
* Write cache
* Look-ahead
* Host Protected Area feature set
* WRITE_VERIFY command
* WRITE_BUFFER command
* READ_BUFFER command
* NOP cmd
* DOWNLOAD_MICROCODE
Advanced Power Management feature set
SET_MAX security extension
* Automatic Acoustic Management feature set
* 48-bit Address feature set
* Device Configuration Overlay feature set
* Mandatory FLUSH_CACHE
* FLUSH_CACHE_EXT
* SMART error logging
* SMART self-test
Media Card Pass-Through
* General Purpose Logging feature set
* WRITE_{DMA|MULTIPLE}_FUA_EXT
* URG for READ_STREAM[_DMA]_EXT
* URG for WRITE_STREAM[_DMA]_EXT
* SATA-I signaling speed (1.5Gb/s)
* Native Command Queueing (NCQ)
Software settings preservation
* SMART Command Transport (SCT) feature set
* SCT Data Tables (AC5)
Security:
Master password revision code = 65534
supported
not enabled
not locked
not frozen
not expired: security count
not supported: enhanced erase
Checksum: correct
root@server:~/.mythtv#

root@server:~/.mythtv# df -h
Filesystem Size Used Avail Use% Mounted on
/dev/sda1 109G 11G 92G 11% /
varrun 506M 264K 506M 1% /var/run
varlock 506M 0 506M 0% /var/lock
udev 506M 68K 506M 1% /dev
devshm 506M 12K 506M 1% /dev/shm
lrm 506M 39M 467M 8% /lib/modules/2.6.24-21-generic/volatile
/dev/mapper/VGforMyth-video
558G 536G 23G 97% /video
root@server:~/.mythtv#

root@server:~/.mythtv# hdparm -I /dev/sda

/dev/sda:

ATA device, with non-removable media
Model Number: ST3120026A
Serial Number: 5JT3WL9H
Firmware Revision: 8.01
Standards:
Used: ATA/ATAPI-6 T13 1410D revision 2
Supported: 6 5 4
Configuration:
Logical max current
cylinders 16383 16383
heads 16 16
sectors/track 63 63
--
CHS current addressable sectors: 16514064
LBA user addressable sectors: 234441648
LBA48 user addressable sectors: 234441648
device size with M = 1024*1024: 114473 MBytes
device size with M = 1000*1000: 120034 MBytes (120 GB)
Capabilities:
LBA, IORDY(can be disabled)
Standby timer values: spec'd by Standard, no device specific minimum
R/W multiple sector transfer: Max = 16 Current = 16
Recommended acoustic management value: 128, current value: 0
DMA: mdma0 mdma1 mdma2 udma0 udma1 udma2 udma3 udma4 *udma5
Cycle time: min=120ns recommended=120ns
PIO: pio0 pio1 pio2 pio3 pio4
Cycle time: no flow control=240ns IORDY flow control=120ns
Commands/features:
Enabled Supported:
* SMART feature set
Security Mode feature set
* Power Management feature set
* Write cache
* Look-ahead
* Host Protected Area feature set
* WRITE_BUFFER command
* READ_BUFFER command
* DOWNLOAD_MICROCODE
SET_MAX security extension
* 48-bit Address feature set
* Device Configuration Overlay feature set
* Mandatory FLUSH_CACHE
* FLUSH_CACHE_EXT
* SMART error logging
* SMART self-test
* General Purpose Logging feature set
Time Limited Commands (TLC) feature set
Command Completion Time Limit (CCTL)
Security:
Master password revision code = 65534
supported
not enabled
not locked
not frozen
not expired: security count
not supported: enhanced erase
HW reset results:
CBLID- above Vih
Device num = 0 determined by the jumper
Checksum: correct
root@server:~/.mythtv#

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s


%d bloggers like this: